NSN 5945-00-287-8022 · NIIN 002878022 · FSC 5945
NO DASHES 5945002878022
In Stock
RELAY,ELECTROMAGNETIC
Relays and Solenoids
Application: ENGINE GENERATOR (EG)
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQYJ | MOUNTING FACILITY PATTERN | SECOND MOUNTING FACILITY RECTANGULAR |
| CRNG | NONPILE-UP MAIN CONTACT ARRANGEMENT | POLE, DOUBLE THROW, ONE POSITION MOMENTARY 2 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.250 |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | FIRST MOUNTING FACILITY INCHES NOMINAL 2.880 |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | SECOND MOUNTING FACILITY INCHES NOMINAL 1.750 |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 4.520 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 3.090 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | FIRST MOUNTING FACILITY INCHES MINIMUM 0.750 AND INCHES MAXIMUM 1.500 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | SECOND MOUNTING FACILITY INCHES NOMINAL 0.500 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | END ITEM IDENTIFICATION | ENGINE GENERATOR (EG) |
| AKDX | WINDING QUANTITY | 1 |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| CWJB | ENERGIZING ELEMENT POWER RATING | WATTS 8.0 |
| MATT | MATERIAL | CASE PLASTIC |
| MATT | MATERIAL | CONTACT SILVER |
| PMLC | PRECIOUS MATERIAL AND LOCATION | SILVER CONTACTS |
| PRMT | PRECIOUS MATERIAL | SILVER |
| ADZC | ENVIRONMENTAL PROTECTION | DUSTPROOF |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | FIRST MOUNTING FACILITY INCHES NOMINAL 0.199 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | SECOND MOUNTING FACILITY INCHES 0.164 |
| CQYJ | MOUNTING FACILITY PATTERN | FIRST MOUNTING FACILITY RECTANGULAR |
| TTQY | TERMINAL TYPE AND QUANTITY | ALL FUNCTIONS SCREW 8 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | SECOND MOUNTING FACILITY THREADED HOLE(S) 4 |
| BBRG | STORAGE TYPE | GENERAL PURPOSE WAREHOUSE |
| CBME | CUBIC MEASURE | CUBIC INCHES 45.392 |
| CRXH | TIME DELAY | ADJUSTABLE OPERATE TIME SECONDS MINIMUM 1.00 AND SECONDS MAXIMUM 300.00 |
| CSXF | OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP | SINGLE WINDING VOLTS DC 25 DEG CELSIUS 32.0 |
| CTDL | MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | RESISTIVE LOAD AMPERES AC 10.0 AND AMPERES DC 15.0 |
| CWAB | MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS | AC 240.0 AND DC 30.0 |
| APCN | COIL QUANTITY | 1 |
| APNP | DUTY TYPE | CONTINUOUS |
| THSD | THREAD SERIES DESIGNATOR | SECOND MOUNTING FACILITY UNIFIED NATIONAL COARSE (UNC) |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | FIRST MOUNTING FACILITY UNTHREADED HOLE(S) 6 |
| AAJD | THREAD CLASS | 2B |
| APNQ | ARC QUENCHING METHOD | AIR |
| AAJF | THREAD DIRECTION | SECOND MOUNTING FACILITY RIGHT-HAND |