NSN 5305-01-646-1355 · NIIN 016461355 · FSC 5305
NO DASHES 5305016461355
In Stock
SCREW,MACHINE
Screws
Application: F-35
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AGAV | END ITEM IDENTIFICATION | F-35 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.1900 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.5000 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, 100 DEG FLUSH HEAD, SIX LOBE RECESS, FULLY THREADED |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.3100 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.1550 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.3220 AND INCHES MAXIMUM 0.3850 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.0800 |