NSN 5305-01-627-5163 · NIIN 016275163 · FSC 5305
NO DASHES 5305016275163
In Stock
SCREW,MACHINE
Screws
Application: F-35
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AGAV | END ITEM IDENTIFICATION | F-35 |
| CYBL | THREAD SURFACE FINISH | MICROINCHES 32.0 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.2660 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,HEX HEAD,SIX-LOBE RECESS |
| CYAU | SCREW MATERIAL | TITANIUM ALLOY |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | NATIONAL SPEC SINGLE MATERIAL RESPONSE A-S4928 OR A-S4967 |
| CYBH | BEARING SURFACE OF HEAD SURFACE FINISH | MICROINCHES 32.0 |
| CYBK | SHANK SURFACE FINISH | MICROINCHES 32.0 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.578 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.251 AND INCHES MAXIMUM 1.281 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.188 AND INCHES MAXIMUM 0.203 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.502 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.3750 |