NSN 5305-01-627-7375 · NIIN 016277375 · FSC 5305
NO DASHES 5305016277375
In Stock
SCREW,MACHINE
Screws
Application: F-35
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.4460 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | F-35 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.678 AND INCHES MAXIMUM 0.690 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.264 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.5000 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NATIONAL SPEC SINGLE TREATMENT RESPONSE A-S2700 |
| CYBH | BEARING SURFACE OF HEAD SURFACE FINISH | MICROINCHES 32.0 |
| CYBK | SHANK SURFACE FINISH | MICROINCHES 32.0 |
| CYBL | THREAD SURFACE FINISH | MICROINCHES 32.0 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.735 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.470 AND INCHES MAXIMUM 3.500 |
| AASK | HEAD STYLE | |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,HEX HEAD,NICKEL ALLOY 718 |
| CYAU | SCREW MATERIAL | NICKEL ALLOY 718 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | NATIONAL SPEC SINGLE MATERIAL RESPONSE A-S5962 OR A-S5662 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CMLP | THREAD QUANTITY PER INCH | 20 |