NSN 5310-00-556-6890 · NIIN 005566890 · FSC 5310
NO DASHES 5310005566890
In Stock
NUT,SELF-LOCKING,PLATE
Nuts and Washers
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AZKQ | TEMP RATING | FAHRENHEIT NOMINAL 450.0 |
| ADFP | NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | ROCKWELL C MAXIMUM 49.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5525 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 5735 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 5737 |
| ADEA | NUT HEIGHT | INCHES MAXIMUM 0.281 |
| CSSM | MOUNTING HOLE COUNTERSINK ANGLE | DEGREES MINIMUM 98.0 AND DEGREES MAXIMUM 102.0 |
| ADFR | MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | |
| ADEB | PLATE THICKNESS | INCHES MAXIMUM 0.047 |
| ADEC | PLATE WIDTH | INCHES MINIMUM 0.406 AND INCHES MAXIMUM 0.453 |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| ABAJ | LUBRICATION | DRY FILM LUBRICANT |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.098 AND INCHES MAXIMUM 0.103 |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | INCHES MINIMUM 0.339 AND INCHES MAXIMUM 0.349 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 0.310 AND INCHES MAXIMUM 0.314 |
| ACTA | NUT STYLE | |
| ACVN | NUT LENGTH | INCHES MAXIMUM 1.013 |
| MATT | MATERIAL | OVERALL IRON ALLOY 660 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |