NSN 6115-01-471-0764 · NIIN 014710764 · FSC 6115
NO DASHES 6115014710764
In Stock
GENERATOR,ALTERNATING CURRENT
Generators and Generator Sets, Electrical
Application: SH-2G HELICOPTER
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJU | OVERALL LENGTH | INCHES 15.230 |
| AAJV | OVERALL WIDTH | INCHES 7.360 |
| AAUH | SPLINE MINOR DIAMETER | SINGLE END INCHES NOMINAL 0.470 |
| ABSA | SPLINE QUANTITY | 6 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.598 AND INCHES MAXIMUM 0.600 |
| AGAV | END ITEM IDENTIFICATION | SH-2G HELICOPTER |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | FEET 15000.0 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| AXGY | MOUNTING METHOD | FLANGE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 6 |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED AND SEPARATELY VENTILATED |
| CNXS | POWER RATING | OUTPUT KILOVOLT-AMPERE 30.0 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.520 |
| CWDY | TEMP RATING | OPERATING CELSIUS -40.0 AND OPERATING CELSIUS 71.0 |
| CWFX | ROTOR SPEED RATING IN RPM | LOW FULL LOAD 11100.0 AND HIGH FULL LOAD 12600.0 AND HIGH NO LOAD 15200.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 5.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | OUTPUT LINE TO LINE LOW 110.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A14 |
| FAAZ | PHASE | OUTPUT THREE |
| FEAT | SPECIAL FEATURES | ASSEMBLY INCLUDES P/N K884087-403 (GENERATOR), P/N K884087-305 (SPLINED COUPLING SHAFT), P/N K884087-007 (SPLINE ADAPTER), P/N M83248/1-110 (O-RING), MIL-G-21164D (MOLYBDENDUM DISULFIDE GREASE), AND P/N P17734 (BACK-UP RING); ADDING SPLINE ADAPTER INCREASES OVERALL LENGTH TO 16.230 INCHES NOMINAL, CHANGES COUPLING SHAFT END FROM 6 TO 16 SPLINE, WITH A ROOT DIAMETER OF 0.725 TO 0.733 INCH, AND SHAFT (MAJOR) DIAMETER OF 0.812 TO 0.817 INCH |
| FREQ | FREQUENCY IN HERTZ | 380.0 OR 420.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | THREADED STUD 4 |