NSN 3120-01-354-8267 · NIIN 013548267 · FSC 3120
NO DASHES 3120013548267
In Stock
BEARING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.3287 AND INCHES MAXIMUM 0.3437 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 0.3755 AND INCHES MAXIMUM 0.3760 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 0.2505 AND INCHES MAXIMUM 0.2515 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 0.7300 AND INCHES MAXIMUM 0.7500 |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0575 AND INCHES MAXIMUM 0.0625 |
| BZLX | CORNER SHAPE | INSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | OUTSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | INSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE BODY CORNER UNDERCUT |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF BODY MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | LEFT END SURFACE OF BODY AND FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF LEFT FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | INSIDE DIAMETER SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF BODY MICROINCHES 125.0 |
| FEAT | SPECIAL FEATURES | PLASTIC LINER BONDED TO LEFT END SURFACE OF FLANGE |
| MATT | MATERIAL | INNER LAYER PLASTIC POLYTETRAFLUOROETHYLENE |
| MATT | MATERIAL | OUTER LAYER STEEL COMP 630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER LAYER ASSN STD SINGLE MATERIAL RESPONSE A-S 5643 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 001515189. An older drawing citing one of those numbers resolves here.