NSN 3020-00-712-9324 · NIIN 007129324 · FSC 3020
NO DASHES 3020007129324
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRM | FACE NOMINAL WIDTH | INCHES 0.816 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.1075 |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 2.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 1.188 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 63.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 4.9480 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 2.219 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 AND DEGREES 60.9500 |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 24 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.8426 |
| AJLA | TEETH QUANTITY | 18 |
| ANTP | BORE STYLE | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.9887 |
| CBBL | FEATURES PROVIDED | STRAIGHT TEETH |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
| STYL | STYLE DESIGNATOR | |
| CWTR | HUB STYLE DESIGNATOR | |
| FEAT | SPECIAL FEATURES | 0.09375 IN. RADIUS GROOVE AT JUNCTION OF HUB AND BODY |
Supersedes
This item replaces cancelled NIIN 003589825. An older drawing citing one of those numbers resolves here.