NSN 6105-00-961-5481 · NIIN 009615481 · FSC 6105
NO DASHES 6105009615481
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJV | OVERALL WIDTH | INCHES 3.266 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| AAJU | OVERALL LENGTH | INCHES 7.062 |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.0066 |
| AAJT | OVERALL HEIGHT | INCHES 3.266 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SECOND END INCHES 2.125 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 2.844 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1550.0 |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 0.430 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | FIRST END INCHES 2.125 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 2 |
| CWHZ | SHAFT END CHARACTERISTIC | SECOND END SINGLE STYLE A5 |
| FAAZ | PHASE | INPUT SINGLE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| CWHZ | SHAFT END CHARACTERISTIC | FIRST END SINGLE STYLE A1 |
| ABWV | SHAFT DIAMETER | IDENTICAL ENDS INCHES NOMINAL 0.2500 |
| AKCT | SHAFT ROTATION DIRECTION | FIRST END CLOCKWISE |
| AKCT | SHAFT ROTATION DIRECTION | SECOND END COUNTERCLOCKWISE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED STUD(S) 2 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | INDUCTION-SHADED POLE |
| AXGY | MOUNTING METHOD | FACE |
Supersedes
This item replaces cancelled NIIN 004752397. An older drawing citing one of those numbers resolves here.