NSN 5990-01-160-5967 · NIIN 011605967 · FSC 5990
NO DASHES 5990011605967
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
47 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.8250 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0500 AND INCHES MAXIMUM 1.0510 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.9290 AND INCHES MAXIMUM 0.9410 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0970 AND INCHES MAXIMUM 0.1030 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1872 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.5450 AND INCHES MAXIMUM 0.5650 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 20.0 |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 300.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 1.1 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 16.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 3.70 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 22.00 |
| AJTC | ZSS RESISTANCE IN OHMS | NOMINAL 4.10 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.000 |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MINIMUM 0.008 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0008 |
| AJWH | SHAFT END PLAY | INCHES NOMINAL 0.0010 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 2.2500 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES MAXIMUM 0.2700 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 107.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 18.10 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 8.90 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MINIMUM 0.1250 |
| CSFG | PLUS J ZSS REACTANCE IN OHMS | NOMINAL 1.40 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.454 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES MINIMUM 0.8090 AND INCHES MAXIMUM 0.8150 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.190 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 8.0 |
| FEAT | SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT 0.125 INCHES NOM. |
| TTQY | TERMINAL TYPE AND QUANTITY | CONNECTOR, PLUG 1 |