NSN 5962-00-162-8770 · NIIN 001628770 · FSC 5962
NO DASHES 5962001628770
In Stock
MICROCIRCUIT,DIGITAL
Microcircuits, Electronic
Application: SPRUANCE CLASS DD (963); VIRGINIA CLASS CGN (41); FORRESTAL CLASS CV; COMMUNICATIONS, LHA; COMMUNICATIONS SYSTEMS, AN/WRR-7; LOS ANGELES CLASS SSN (688); STURGEON CLASS SSN (637); NIMITZ CLASS CVN; TICONDEROGA CLASS CG (47)
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.275 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.160 AND INCHES MAXIMUM 0.185 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.030 AND INCHES MAXIMUM 0.070 |
| AEHX | MAXIMUM POWER DISSIPATION RATING | MILLIWATTS 90.0 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 125.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 150.0 |
| AGAV | END ITEM IDENTIFICATION | SPRUANCE CLASS DD (963); VIRGINIA CLASS CGN (41); FORRESTAL CLASS CV; COMMUNICATIONS, LHA; COMMUNICATIONS SYSTEMS, AN/WRR-7; LOS ANGELES CLASS SSN (688); STURGEON CLASS SSN (637); NIMITZ CLASS CVN; TICONDEROGA CLASS CG (47) |
| CBBL | FEATURES PROVIDED | MONOLITHIC AND HERMETICALLY SEALED AND POSITIVE OUTPUTS AND MEDIUM SPEED |
| CQSJ | INCLOSURE MATERIAL | CERAMIC AND GLASS |
| CQSZ | INCLOSURE CONFIGURATION | FLAT PACK |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| CQZP | INPUT CIRCUIT PATTERN | HEX 1 INPUT |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CSSL | DESIGN FUNCTION AND QUANTITY | INVERTER, DIGITAL 6 |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | JOINT ELECTRON DEVICE ENGINEERING COUNCIL T0-85 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MINIMUM POWER SOURCE -1.5 AND VOLTS MAXIMUM POWER SOURCE 5.5 |
| CZEQ | TIME RATING PER CHACTERISTIC | NANOSECONDS NOMINAL PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT 10.00 |
| FEAT | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 13499-351-7495 |
| TTQY | TERMINAL TYPE AND QUANTITY | FLAT LEADS 14 |
Supersedes
This item replaces cancelled NIIN 010345179. An older drawing citing one of those numbers resolves here.