NSN 5306-01-683-7018 · NIIN 016837018 · FSC 5306
NO DASHES 5306016837018
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5629 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.1900 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.438 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.34 AND INCHES MAXIMUM 0.35 |
| AATD | EXTENDED WASHER THICKNESS | INCHES NOMINAL 0.064 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.828 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.196 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.243 AND INCHES MAXIMUM 0.251 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT-TENSION, 12 PTM EXTERNAL WRENCHING, 220KSI MIN TENSI |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.390 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| BQDM | HOLE TYPE | DRILLED |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.095 AND INCHES MAXIMUM 0.135 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 43999-LS111-0020 THRU 0021 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| ASXK | HOLE QUANTITY | 1 |
| CMLP | THREAD QUANTITY PER INCH | 32 |