NSN 2010-00-595-5404 · NIIN 005955404 · FSC 2010
NO DASHES 2010005955404
In Stock
SHAFT,PROPULSION,SHIP
Ship and Boat Propulsion Components
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CPNM | COUPLING LENGTH | FEET NOMINAL 0.354 |
| CPNK | AFTER END COUPLING DESIGN | INTEGRAL |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 20.500 AND INCHES MAXIMUM 20.550 |
| ABMZ | DIAMETER | INCHES MINIMUM 20.500 AND INCHES MAXIMUM 20.550 |
| AGYE | SURFACE FINISH | GROUND OR ROUGH MACHINED OR SMOOTH MACHINED |
| AHSU | COUPLING OUTSIDE DIAMETER | INCHES NOMINAL 35.500 |
| CPJH | FORWARD END COUPLING DESIGN | INTEGRAL |
| CPTH | AFTER BEARING SLEEVE OUTSIDE DIAMETER | INCHES MINIMUM 20.621 AND INCHES MAXIMUM 20.625 |
| CPTP | AFTER BEARING SLEEVE LENGTH | FEET NOMINAL 1.000 |
| CPTB | COUPLING THICKNESS | INCHES NOMINAL 4.250 |
| BPJZ | USAGE LOCATION | PORT |
| CPHM | FORWARD END DESIGN | STRAIGHT |
| CPHX | FORWARD END DIAMETER | INCHES MINIMUM 20.500 AND INCHES MAXIMUM 20.550 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-23284, CLASS 3 |
| MATT | MATERIAL | STEEL |
| CPJK | FORWARD END COUPLING OUTSIDE DIAMETER | INCHES NOMINAL 35.500 |
| CPJL | FORWARD END COUPLING LENGTH | FEET NOMINAL 1.109 |
| CPJM | FORWARD END COUPLING THICKNESS | INCHES MINIMUM 4.250 AND INCHES MAXIMUM 13.312 |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 13.380 AND INCHES MAXIMUM 13.560 |
| ABHP | OVERALL LENGTH | FEET NOMINAL 9.429 |
| CPTC | AFTER END DESIGN | STRAIGHT |
| APQB | UNIT TYPE | LINE SHAFT SECTION |
| APZX | PROTECTIVE COVERING TYPE | COMPOSITION RUST PREVENTIVE |
| CPTS | COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES AND FLANGEFACES,BORE SURFACES |
| CQCF | CONSTRUCTION | HOLLOW |