NSN 2010-00-586-9962 · NIIN 005869962 · FSC 2010
NO DASHES 2010005869962
In Stock
SHAFT,PROPULSION,SHIP
Ship and Boat Propulsion Components
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | STEEL |
| BPJZ | USAGE LOCATION | PORT |
| CQCF | CONSTRUCTION | HOLLOW |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 13.380 AND INCHES MAXIMUM 13.560 |
| ABHP | OVERALL LENGTH | FEET NOMINAL 30.088 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 20.500 AND INCHES MAXIMUM 20.550 |
| ABMZ | DIAMETER | INCHES MINIMUM 20.500 AND INCHES MAXIMUM 20.550 |
| AGYE | SURFACE FINISH | GROUND OR ROUGH MACHINED OR SMOOTH MACHINED |
| AHSU | COUPLING OUTSIDE DIAMETER | INCHES NOMINAL 35.500 |
| AMCD | INTERMEDIATE BEARING SLEEVE OUTSIDE DIAMETER | INCHES MINIMUM 20.621 AND INCHES MAXIMUM 20.625 |
| CPHM | FORWARD END DESIGN | STRAIGHT |
| CPTC | AFTER END DESIGN | STRAIGHT |
| CPHX | FORWARD END DIAMETER | INCHES MINIMUM 20.500 AND INCHES MAXIMUM 20.550 |
| CPJH | FORWARD END COUPLING DESIGN | INTEGRAL |
| CPJK | FORWARD END COUPLING OUTSIDE DIAMETER | INCHES NOMINAL 35.500 |
| CPJL | FORWARD END COUPLING LENGTH | FEET NOMINAL 0.442 |
| CPTS | COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES AND FLANGE FACES,BORE SURFACES |
| CPNK | AFTER END COUPLING DESIGN | INTEGRAL |
| APQB | UNIT TYPE | TORSIONMETER SHAFT OR LINE SHAFT SECTION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-23284, CLASS 3 |
| CPNM | COUPLING LENGTH | FEET NOMINAL 0.354 |
| CPTB | COUPLING THICKNESS | INCHES NOMINAL 4.250 |
| AMCE | INTERMEDIATE BEARING SLEEVE LENGTH | FEET NOMINAL 12.709 |
| APZX | PROTECTIVE COVERING TYPE | COMPOSITION RUST PREVENTIVE |
| CPJM | FORWARD END COUPLING THICKNESS | INCHES NOMINAL 4.250 |