NSN 5306-01-692-6463 · NIIN 016926463 · FSC 5306
NO DASHES 5306016926463
In Stock
BOLT,SHEAR
Bolts
Application: B1-BACFT
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.347 AND INCHES MAXIMUM 0.361 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.2500 |
| AATD | EXTENDED WASHER THICKNESS | INCHES NOMINAL 0.042 |
| ASXK | HOLE QUANTITY | 4 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.500 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.178 AND INCHES MAXIMUM 0.198 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,12 POINT HEAD,220 KSI MIN TENSILE,NICKEL ALLOY 718 |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.673 AND INCHES MAXIMUM 0.703 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.235 |
| AAJD | THREAD CLASS | 2A |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 43999-LE111-0067 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.032 AND INCHES MAXIMUM 0.042 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2802 AND INCHES MAXIMUM 0.2807 |
| AGAV | END ITEM IDENTIFICATION | B1-BACFT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5662 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 2700,-ETHOD 1,TYE 2 OR 8 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.465 AND INCHES MAXIMUM 0.475 |