NSN 5905-01-267-1321 · NIIN 012671321 · FSC 5905
NO DASHES 5905012671321
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Application: B-1B AIRCRAFT
Technical characteristics
47 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.875 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 1.218 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.312 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 2.500 |
| AEDQ | UNDERCUT DIAMETER | INCHES NOMINAL 0.125 |
| AEDX | SHAFT STYLE | |
| AEEA | SWITCH TYPE | ROTARY |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 28.0 |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| AEFD | ACTUATOR TYPE | DUAL CONCENTRIC |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 270.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 9.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 9.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 64.00 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.312 |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 3.0 |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | END ITEM IDENTIFICATION | B-1B AIRCRAFT |
| AGQL | UNDERCUT LENGTH | INCHES NOMINAL 0.406 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ARNH | OPERATING POSITION | SWITCH START OF ROTATION |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| BYDT | BEARING TYPE | SHAFT BEARING |
| CBBL | FEATURES PROVIDED | SWITCH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 10.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 275.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.25 TO 0.25 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 150.0 |
| CQPH | DEVICE DESIGN TYPE | AT 6:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -30.0 TO 30.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR 1ST SECTION 2.0 AND FREE AIR 2ND SECTION 1.5 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -3.0 TO 3.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 85.0 |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | DC 0.150 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 43999-LE444-0001 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 9 |