NSN 5306-01-277-6890 · NIIN 012776890 · FSC 5306
NO DASHES 5306012776890
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.741 AND INCHES MAXIMUM 0.791 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.313 AND INCHES MAXIMUM 1.343 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.494 AND INCHES MAXIMUM 0.514 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.553 AND INCHES MAXIMUM 0.564 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.818 AND INCHES MAXIMUM 0.828 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.113 AND INCHES MAXIMUM 0.133 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.060 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4985 AND INCHES MAXIMUM 0.4995 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.552 AND INCHES MAXIMUM 0.572 |
| ASXK | HOLE QUANTITY | 4 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6487 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2 CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |