NSN 5950-01-172-9889 · NIIN 011729889 · FSC 5950
NO DASHES 5950011729889
In Stock
REACTOR
Coils and Transformers
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHY | TURN QUANTITY | 40 |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | SINGLE MOUNTING FACILITY SINGLE CENTER GROUP INCHES NOMINAL 2.250 |
| ABKR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | SINGLE MOUNTING FACILITY SINGLE CENTER GROUP INCHES NOMINAL 2.250 |
| ACYF | INDUCTANCE TYPE | FIXED |
| ACYV | INDUCTANCE RATING | SINGLE COMPONENT SINGLE WINDING MICROHENRIES NOMINAL 226.00 |
| ACZB | FREQUENCY RATING | SINGLE COMPONENT KILOHERTZ NOMINAL 2.7 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 3.000 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 3.000 |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 1.000 |
| AKDX | WINDING QUANTITY | 1 |
| AKNA | INCLOSURE TYPE | FULLY INCLOSED |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| AXGY | MOUNTING METHOD | SINGLE GROUP THREADED HOLE(S) |
| BKPL | RATING METHOD | SINGLE COMPONENT SINGLE WINDING WINDING TURNS AND ELECTRICAL |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | SINGLE GROUP INCHES 0.164 |
| CQPZ | WINDING CONDUCTOR SIZE | SINGLE COMPONENT SINGLE WINDING INCHES AMERICAN WIRE GAGE 0.03589 |
| CRGS | DC RESISTANCE RATING IN OHMS | 0.034 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| FEAT | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STARNDARD NO. LO3350 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE GROUP UNIFIED NATIONAL COARSE (UNC) |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 4 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP |