NSN 6105-00-930-8920 · NIIN 009308920 · FSC 6105
NO DASHES 6105009308920
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 9 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 7.500 |
| CWGL | CURRENT RATING IN AMPS | INPUT FIRST MULTIPLE 17.600 OR SECOND MULTIPLE 8.800 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL LOW 208.0 OR LINE TO NEUTRAL HIGH 220.0 OR LINE TO NEUTRAL SECOND MULTIPLE 440.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A9 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1650.0 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 5.500 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 1.7500 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 5.0000 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 2.750 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 50.0 |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF PROTECTED-45 DEG |
| AXCP | WINDING TYPE | SYNCHRONOUS |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| AAJT | OVERALL HEIGHT | INCHES 9.250 |
| AAJU | OVERALL LENGTH | INCHES 14.900 |
| AAJV | OVERALL WIDTH | INCHES 8.500 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.2500 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.1250 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 1.1250 |
| CNMM | FRAME SIZE DESIGNATION | F-1 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 4.500 |