NSN 5305-00-505-4070 · NIIN 005054070 · FSC 5305
NO DASHES 5305005054070
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 8740 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.052 AND INCHES MAXIMUM 0.072 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.266 AND INCHES MAXIMUM 0.303 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| AASK | HEAD STYLE | |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.318 AND INCHES MAXIMUM 0.368 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.390 AND INCHES MAXIMUM 0.420 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC ALL TREATMENT RESPONSES QQ--416,TY 2,CL 2 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |