NSN 6105-00-179-1193 · NIIN 001791193 · FSC 6105
NO DASHES 6105001791193
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 1.937 |
| AAJU | OVERALL LENGTH | INCHES 3.875 |
| AAJV | OVERALL WIDTH | INCHES 1.937 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.250 |
| ABXQ | FLATTED PORTION LENGTH | SINGLE END INCHES NOMINAL 0.625 |
| AGRB | FLAT DEPTH | SINGLE END INCHES NOMINAL 0.020 |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | FEET 50000.0 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| ANTN | SPECIFIC USE | BLOWER ASSEMBLIES,PHILCO 756-8734 AND 756-8735 |
| AXCP | WINDING TYPE | INDUCTION-SINGLE VALUE CAPACITOR SPLIT PHASE |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 3 |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.003 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.688 |
| CWDY | TEMP RATING | AMBIENT CELSIUS -45.0 AND AMBIENT CELSIUS 65.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 1.312 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 4500.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 0.600 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A5 |
| FAAZ | PHASE | INPUT SINGLE |
| FEAT | SPECIAL FEATURES | SHAFT END STYLE A5,EXCEPT ADDITIONAL FLAT AT 90 DEG,SAME DIM. |
| FREQ | FREQUENCY IN HERTZ | 400.0 OR 1600.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |