NSN 6680-00-882-0965 · NIIN 008820965 · FSC 6680
NO DASHES 6680008820965
In Stock
SHAFT ASSEMBLY,FLEXIBLE
Liquid and Gas Flow, Liquid Level, and Mechanical Motion Measuring Instruments
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CFRW | END OVERALL DIAMETER | SECOND END INCHES NOMINAL 0.875 |
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | BOTH ENDS RIGHT-HAND |
| CFRP | CASING LENGTH BETWEEN FERRULES | INCHES NOMINAL 67.500 |
| CFRQ | CASING OUTSIDE DIAMETER | INCHES MINIMUM 0.300 AND INCHES MAXIMUM 0.500 |
| CFRR | CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER OR RUBBER COVER |
| CFRW | END OVERALL DIAMETER | FIRST END INCHES NOMINAL 1.188 |
| CFRZ | CORE OVERALL LENGTH | INCHES NOMINAL 68.812 |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| FEAT | SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION |
| MATT | MATERIAL | CASING RUBBER AND STEEL |
| AEDN | TIP LENGTH | FIRST END INCHES MINIMUM 1.018 AND INCHES MAXIMUM 1.022 |
| AEDN | TIP LENGTH | SECOND END INCHES MINIMUM 0.950 AND INCHES MAXIMUM 1.010 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | FIRST END UNS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | SECOND END UNF |
| AKMH | CORE DIAMETER | INCHES NOMINAL 0.150 |
| APJC | THREAD LOCATION | BOTH ENDS INTERNAL |
| APTD | END TYPE | FIRST END ROUND KEYED |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 68.812 |
| AECT | THREAD DEPTH | FIRST END INCHES NOMINAL 0.327 |
| AECT | THREAD DEPTH | SECOND END INCHES NOMINAL 0.375 |
| SFTT | SURFACE TREATMENT | CORE CADMIUM |
| APTD | END TYPE | SECOND END SQUARE MALE |
| ASDB | WIDTH ACROSS FLATS | FIRST END INCHES NOMINAL 1.000 |
| ASDB | WIDTH ACROSS FLATS | SECOND END INCHES NOMINAL 0.750 |
| AWZY | END CONNECTION TYPE | BOTH ENDS THREADED INTERNAL |
| BPPL | WRENCHING FACILITY TYPE | BOTH ENDS HEXAGON |
| ZZZV | FSC APPLICATION DATA | SPEEDOMETER,VEHICULAR |
| SCSZ | CROSS SECTION SIZE | DIAMETER FIRST END INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.153 |
| MATT | MATERIAL | CORE STEEL |
| SCSZ | CROSS SECTION SIZE | ACROSS FLATS SECOND END INCHES MINIMUM 0.101 AND INCHES MAXIMUM 0.104 |
Supersedes
This item replaces cancelled NIINs 003229509 · 008921729. An older drawing citing one of those numbers resolves here.