NSN 5310-00-479-9162 · NIIN 004799162 · FSC 5310
NO DASHES 5310004799162
In Stock
NUT,SELF-LOCKING,PLATE
Nuts and Washers
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADEC | PLATE WIDTH | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.297 |
| ADFK | NUT COUNTERBORE DEPTH | NUT INCHES MINIMUM 0.062 |
| ADFP | NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | ROCKWELL C MAXIMUM 49.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.164 |
| CSSM | MOUNTING HOLE COUNTERSINK ANGLE | DEGREES MINIMUM 98.0 AND DEGREES MAXIMUM 102.0 |
| MATT | MATERIAL | OVERALL IRON ALLOY 660 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST MATERIAL RESPONSE A-S5735 OR ASSN STD 2ND MATERIAL RESPONSE A-S5735 |
| PRMT | PRECIOUS MATERIAL | SILVER |
| ADFR | MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | INCHES MINIMUM 0.229 AND INCHES MAXIMUM 0.239 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 0.217 AND INCHES MAXIMUM 0.221 |
| AAWY | COUNTERBORE DIAMETER | NUT INCHES MINIMUM 0.168 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.098 AND INCHES MAXIMUM 0.103 |
| ACTA | NUT STYLE | |
| ACVN | NUT LENGTH | INCHES MAXIMUM 0.486 |
| ADEA | NUT HEIGHT | INCHES MAXIMUM 0.250 |
| ADEB | PLATE THICKNESS | INCHES MAXIMUM 0.047 |
| AAJD | THREAD CLASS | 3B |
| SFTT | SURFACE TREATMENT | OVERALL SILVER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 2410 |
| AZKQ | TEMP RATING | FAHRENHEIT NOMINAL 800.0 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL COARSE (UNC) |