NSN 5990-00-060-2321 · NIIN 000602321 · FSC 5990
NO DASHES 5990000602321
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
49 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.9850 AND INCHES MAXIMUM 1.9900 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5950 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.1700 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.2990 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.2490 AND INCHES MAXIMUM 2.2500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.9900 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.2500 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2403 AND INCHES MAXIMUM 0.2405 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.7190 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 10.0 |
| AJSL | BODY SIZE | 23 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-20708 TO 53 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 4200.00 AND MAXIMUM 5100.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | MINIMUM 70.00 AND MAXIMUM 76.00 |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 1350.00 AND MAXIMUM 1650.00 |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | MINIMUM 14.00 AND MAXIMUM 20.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 14.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 30.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 45.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.20 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | INCHES NOMINAL 0.125 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0010 |
| AJWH | SHAFT END PLAY | INCHES NOMINAL 0.0025 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0430 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 3.5800 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0008 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2900 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.735 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 400.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 18.5 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
Supersedes
This item replaces cancelled NIINs 000201060 · 005536712 · 008838818. An older drawing citing one of those numbers resolves here.