NSN 4720-00-846-6129 · NIIN 008466129 · FSC 4720
NO DASHES 4720008466129
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Application: GRUMMAN A10 AIRCRAFT
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 6000.0 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 160.0 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 360.000 |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 0.212 |
| AHNC | CONNECTION STYLE | |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, CHLOROPRENE OR WRAPPED RUBBER, CHLOROPRENE |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND OZONE RESISTANT |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.500 |
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC -IL -S28760 AND GOVERNMENT SPECIFICATION 81349--IL-H-26633 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 3.250 |
| AGAV | END ITEM IDENTIFICATION | GRUMMAN A10 AIRCRAFT |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 3000.0 |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL CORROSION RESISTING |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND PERFORATED OUTER COVER |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 12000.0 |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE AND OUTER LAYER WRAPPED RUBBER, CHLOROPRENE |
| ABKV | OUTSIDE DIAMETER | INCHES MAXIMUM 0.703 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE |
Supersedes
This item replaces cancelled NIIN 001393826. An older drawing citing one of those numbers resolves here.