NSN 3020-00-517-5040 · NIIN 005175040 · FSC 3020
NO DASHES 3020005175040
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.625 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.625 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| FEAT | SPECIAL FEATURES | 1/16 IN. BY 45 DEG CHAMFER ON BOTH ENDS OF HUB |
| MATT | MATERIAL | OVERALL STEEL COMP 416 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,CLASS416 |
| STYL | STYLE DESIGNATOR | |
| AJLA | TEETH QUANTITY | 60 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.625 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.8750 |
| AAQL | BODY STYLE | |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.064 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.281 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.156 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.188 |