NSN 2540-01-335-4453 · NIIN 013354453 · FSC 2540
NO DASHES 2540013354453
In Stock
MOTOR,HYDRAULIC
Vehicular Furniture and Accessories
Application: HYSTER MODEL C805B COMPACTOR
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAXX | MOUNTING TYPE | FLANGE |
| ABSA | SPLINE QUANTITY | 13 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.560 |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| ABUJ | THREAD SIZE | 0.250-18 |
| AECS | BOLT HOLE QUANTITY | 8 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 2000.0 |
| AGAV | END ITEM IDENTIFICATION | HYSTER MODEL C805B COMPACTOR |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | NPT |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| APJC | THREAD LOCATION | OVERALL INTERNAL |
| ARQA | SHAFT PROTRUSION LENGTH | INCHES NOMINAL 1.620 |
| ASAP | SPLINE PITCH | 16/32 |
| ASMM | CONNECTION QUANTITY | 3 |
| AWLS | CONNECTION TYPE | INLET AND OUTLET AND DRAIN |
| AXFC | CONNECTION DESIGN | FLANGED AND THREADED |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AXFH | SPLINE LENGTH | INCHES NOMINAL 1.310 |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| AZFG | MOUNTING BOLT HOLE SPACING | 3.540 IN. BY 3.540 IN. |