NSN 5935-00-484-3102 · NIIN 004843102 · FSC 5935
NO DASHES 5935004843102
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQJX | NOMINAL THREAD SIZE | INCHES 0.875 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.406 AND INCHES MAXIMUM 1.471 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 1.117 AND INCHES MAXIMUM 1.133 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.117 AND INCHES MAXIMUM 1.133 |
| AAJD | THREAD CLASS | 2A |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES MINIMUM 0.901 AND INCHES MAXIMUM 0.911 |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING CRIMP |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY |
| CSWM | SHELL SURFACE TREATMENT | CHROMIUM |
| CXCG | INCLUDED CONTACT QUANTITY | 37 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND SOCKET |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | BODY STYLE | |
| AFRP | INSERT POSITION IN DEG | 247.0 AND 204.0 AND 178.0 AND 108.0 |
| AFRT | SHELL TYPE | SOLID |
| AFRV | CONNECTOR LOCKING METHOD | BAYONET PIN |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.037 |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-81511 |
| THSD | THREAD SERIES DESIGNATOR | UN |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CQTZ | CONTACT MATERIAL | SINGLE MATING END SINGLE CONTACT GROUPING COPPER ALLOY |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SINGLE MATING END SINGLE CONTACT GROUPING MIL SPEC SINGLE TREATMENT RESPONSE -IL-G-45204,TYE 1,CLASS 2 |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING REMOVABLE |
| AFRN | POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQR | THREADED DEVICE TYPE | BACK SHELL |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES MINIMUM 0.901 AND INCHES MAXIMUM 0.911 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-81511 TO 1 |
| ADZC | ENVIRONMENTAL PROTECTION | PRESSURE PROOF AND MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES MINIMUM 0.894 AND INCHES MAXIMUM 0.906 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.116 AND INCHES MAXIMUM 0.126 |