NSN 5935-00-763-8895 · NIIN 007638895 · FSC 5935
NO DASHES 5935007638895
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQJX | NOMINAL THREAD SIZE | INCHES 0.500 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.275 AND INCHES MAXIMUM 1.340 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.804 AND INCHES MAXIMUM 0.820 |
| AFRV | CONNECTOR LOCKING METHOD | BAYONET PIN |
| AAQL | BODY STYLE | |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.116 AND INCHES MAXIMUM 0.126 |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING CRIMP |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY 6061 |
| CSWM | SHELL SURFACE TREATMENT | CHROMIUM |
| CTHH | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-367,CO- 6061,T6 |
| CXCG | INCLUDED CONTACT QUANTITY | 4 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AFRN | POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE |
| AFRP | INSERT POSITION IN DEG | 232.0 |
| AFRT | SHELL TYPE | SOLID |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.020 |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-81511 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CQTZ | CONTACT MATERIAL | SINGLE MATING END SINGLE CONTACT GROUPING COPPER ALLOY |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SINGLE MATING END SINGLE CONTACT GROUPING MIL SPEC SINGLE TREATMENT RESPONSE -IL-G-45204,TYE 1,CLASS 2 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING REMOVABLE |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND PIN |
| AFQR | THREADED DEVICE TYPE | BACK SHELL |
| AFQW | MATING END QUANTITY | 1 |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES MINIMUM 0.765 AND INCHES MAXIMUM 0.775 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES MINIMUM 0.589 AND INCHES MAXIMUM 0.599 |
| THSD | THREAD SERIES DESIGNATOR | UNEF |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-81511 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES MINIMUM 0.589 AND INCHES MAXIMUM 0.599 |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.804 AND INCHES MAXIMUM 0.820 |
Supersedes
This item replaces cancelled NIIN 000013144. An older drawing citing one of those numbers resolves here.