NSN 5310-00-494-1771 · NIIN 004941771 · FSC 5310
NO DASHES 5310004941771
In Stock
NUT,SELF-LOCKING,PLATE
Nuts and Washers
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 0.560 AND INCHES MAXIMUM 0.564 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABAJ | LUBRICATION | DRY FILM LUBRICANT |
| MATT | MATERIAL | NUT STEEL COMP 4130 |
| MATT | MATERIAL | SHELL STEEL COMP 1050 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BRACKET ASSN STD SINGLE MATERIAL RESPONSE AISI |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NUT ASSN STD SINGLE MATERIAL RESPONSE SAE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SHELL ASSN STD SINGLE MATERIAL RESPONSE AISI |
| BZRR | THREAD SERIES | UNF |
| AAJD | THREAD CLASS | 3B |
| ADFP | NUT MOUNTING PROVISION | STRAIGHT HOLES |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | INCHES MINIMUM 0.276 AND INCHES MAXIMUM 0.286 |
| SFTT | SURFACE TREATMENT | NUT CADMIUM |
| SFTT | SURFACE TREATMENT | SHELL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BRACKET FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NUT FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 3 |
| CBBL | FEATURES PROVIDED | FLOATING NUT |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| MATT | MATERIAL | BRACKET STEEL COMP 1010 |
| ADEC | PLATE WIDTH | INCHES MAXIMUM 0.500 |
| ADFK | NUT COUNTERBORE DEPTH | NUT INCHES MINIMUM 0.500 AND INCHES MAXIMUM 0.505 |
| SFTT | SURFACE TREATMENT | BRACKET CADMIUM AND CHROMATE |
| ADEA | NUT HEIGHT | INCHES MAXIMUM 0.710 |
| ADEB | PLATE THICKNESS | INCHES MAXIMUM 0.125 |
| ACVN | NUT LENGTH | INCHES MAXIMUM 0.791 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.098 AND INCHES MAXIMUM 0.103 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SHELL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2 |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| ACTA | NUT STYLE | |
| AAWY | COUNTERBORE DIAMETER | NUT INCHES MINIMUM 0.254 |