NSN 3020-00-174-5581 · NIIN 001745581 · FSC 3020
NO DASHES 3020001745581
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 5.0000 |
| AJLA | TEETH QUANTITY | 40 |
| ANTP | BORE STYLE | |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | AXIALLY THROUGH HUB FIRST END UNF |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 27.0 AND ROCKWELL C MAXIMUM 32.0 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | AXIALLY THROUGH HUB FIRST END INCHES 0.250 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | AXIALLY THROUGH HUB FIRST END THREADED 6 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 5.249 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.063 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.250 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.000 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.834 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 4.313 |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | AXIALLY THROUGH HUB FIRST END INCHES 3.688 |
| FEAT | SPECIAL FEATURES | BOTH ENDS OF TEETH CHAMFERED 1/8 IN. BY 30 DEG |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-890,ALLOY NO 2 |
| STYL | STYLE DESIGNATOR |