NSN 8040-01-671-2252 · NIIN 016712252 · FSC 8040
NO DASHES 8040016712252
In Stock
ADHESIVE
Adhesives
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ARAW | MINIMUM FLASH POINT | DEG CELSIUS 93.40 |
| HUES | COLOR | YELLOW |
| FEAT | SPECIAL FEATURES | PHYSICAL STATE: PASTE/GEL; ODOR: SLIGHT ETHEREAL; BOILING POINT: 250.00 DEG. C.; RELATIVE DENSITY: 1.2; SOLUBILITY: NEGLIGIBLE; VOC CONTENT: NEGLIGIBLE; HAZARDOUS POLYMERIZATION WILL NOT OCCUR; AVOID HEAT, FLAMES AND SPARKS; HAZARDOUS DECOMPOSITION PRODUCTS: CARBON OXIDES, PHENOLS, AROMATIC HYDROCARBONS; TWO PART, ROOM TEMPERATURE CURING EPOXY PASTE ADHESIVE; CORROSIVE, AVOID PHYSICAL CONTACT W/ SKIN, MOUTH AND EYES;KEEP IN A DRY AND COOL PLACE. |
| SUPP | SUPPLEMENTARY FEATURES | COLOR: PART A: YELLOW COLORED PASTE, PART B: BLUE COLORED SEMI-PASTE; |
| AGXW | PHYSICAL FORM | PASTE |
| ALXZ | SPECIFIC USAGE DESIGN | STRUCTURAL AEROSPACE ADHESIVE |
| AMEX | CURING METHOD | AIR DRIED |
| CWZM | RATED DRYING TIME | HOURS MINIMUM 6.00 AND HOURS MAXIMUM 12.00 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | MAGNOBOND TWO PART EPOXY ADHESIVE |
| MATT | MATERIAL | RESIN EPOXY |