NSN 5306-01-027-6401 · NIIN 010276401 · FSC 5306
NO DASHES 5306010276401
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.517 AND INCHES MAXIMUM 0.584 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.339 AND INCHES MAXIMUM 3.386 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.340 AND INCHES MAXIMUM 0.360 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.928 AND INCHES MAXIMUM 0.940 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.6235 AND INCHES MAXIMUM 0.6240 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.146 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.625 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.802 AND INCHES MAXIMUM 2.822 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 3.205 AND INCHES MAXIMUM 3.272 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 23-112,-CDONNEL DOUGLAS COR |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |