NSN 5306-01-076-3168 · NIIN 010763168 · FSC 5306
NO DASHES 5306010763168
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Application: AIRCRAFT, EAGLE F-15
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.517 AND INCHES MAXIMUM 0.584 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.965 AND INCHES MAXIMUM 4.012 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.340 AND INCHES MAXIMUM 0.360 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.928 AND INCHES MAXIMUM 0.940 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.6235 AND INCHES MAXIMUM 0.6240 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.146 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, EAGLE F-15 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.625 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 3.428 AND INCHES MAXIMUM 3.448 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 3.831 AND INCHES MAXIMUM 3.898 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 23-112,FSC- 76301 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 76301-ST3-729 |