NSN 5306-01-480-6412 · NIIN 014806412 · FSC 5306
NO DASHES 5306014806412
In Stock
BOLT,SHEAR
Bolts
Application: F18 E/F
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.389 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.624 AND INCHES MAXIMUM 0.654 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.250 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.354 AND INCHES MAXIMUM 0.359 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.111 AND INCHES MAXIMUM 0.121 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.075 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| AAZH | HEAD MINOR DIAMETER | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.265 |
| AGAV | END ITEM IDENTIFICATION | F18 E/F |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.3750 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.250 |
| ASXK | HOLE QUANTITY | 4 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT-CLOSE TOLERANCE,SPLINE DRIVE,FLANGE HEAD (220 KSI FTU)CRES |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE A-S-QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |