NSN 5305-01-236-9157 · NIIN 012369157 · FSC 5305
NO DASHES 5305012369157
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.628 AND INCHES MAXIMUM 0.678 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.178 AND INCHES MAXIMUM 2.208 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.7995 AND INCHES MAXIMUM 0.8000 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.340 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | ALL HOLES INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.151 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.625 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.3130 AND INCHES MAXIMUM 0.3150 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | ALL HOLES INCHES MINIMUM 1.989 AND INCHES MAXIMUM 2.029 |
| FEAT | SPECIAL FEATURES | TWO HOLES DRILLED IN THREADED PORTION 90 DEGREES APART; CENTER OF HOLES 0.179 MIN AND 0.189 MAX FROM END OF SCREW |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |