NSN 5990-00-734-3837 · NIIN 007343837 · FSC 5990
NO DASHES 5990007343837
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 31.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 54.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 49.00 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 4.2060 AND INCHES MAXIMUM 4.2360 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0670 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.9850 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0200 AND INCHES MAXIMUM 0.0350 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 192.40 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 53.00 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 06481-900141-93 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 8 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.154 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 65.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 0.6250 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 21.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 8.900 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 17.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 26.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -9.0 TO 9.0 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0005 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 3.8120 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0008 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 224.50 |
| AJSL | BODY SIZE | 11 |
| AJWH | SHAFT END PLAY | INCHES NOMINAL 0.0020 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0650 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 23.90 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3940 AND INCHES MAXIMUM 0.4340 |
| ABRY | LENGTH | SHOULDER INCHES MAXIMUM 0.0620 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0450 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0200 AND INCHES MAXIMUM 0.0350 |