NSN 5905-01-237-7260 · NIIN 012377260 · FSC 5905
NO DASHES 5905012377260
In Stock
RESISTOR NETWORK,FIXED,FILM
Resistor
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -150.0 TO 150.0 |
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -300.0 TO 300.0 |
| AAPP | ELECTRICAL RESISTANCE | FOURTH INTERMEDIATE RESISTANCE VALUE KILOHMS 147.000 |
| AAPP | ELECTRICAL RESISTANCE | LOWEST RESISTANCE VALUE KILOHMS 5.110 |
| AAPP | ELECTRICAL RESISTANCE | THIRD INTERMEDIATE RESISTANCE VALUE KILOHMS 20.000 |
| AAPP | ELECTRICAL RESISTANCE | FIRST INTERMEDIATE RESISTANCE VALUE KILOHMS 6.190 |
| AAPP | ELECTRICAL RESISTANCE | SECOND INTERMEDIATE RESISTANCE VALUE KILOHMS 10.000 |
| AAPP | ELECTRICAL RESISTANCE | HIGHEST RESISTANCE VALUE KILOHMS 511.000 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -2.000 TO 2.000 |
| AAQF | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 |
| AAQZ | INCLOSURE METHOD | ENCAPSULATED |
| AARA | TERMINAL QUANTITY | 16 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES MAXIMUM 0.200 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.870 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.310 |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 0.200 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AEFB | POWER DISSIPATION RATING IN WATTS | TOTAL RESISTANCE TOTAL NETWORK 1.000 |
| AFWW | TERMINAL WIDTH | INCHES MAXIMUM 0.023 |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.054 |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 4 |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 2 |
| CSCF | TERMINAL TYPE | PIN |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 51215-V510-00036 |