NSN 3413-00-528-8606 · NIIN 005288606 · FSC 3413
NO DASHES 3413005288606
In Stock
DRILLING MACHINE,UPRIGHT
Drilling and Tapping Machines
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BCRH | SPINDLE QUANTITY | 1 |
| BWJR | INTERMEDIATE WORKING SURFACE SHAPE | ROUND |
| BWJQ | INTERMEDIATE WORKING SURFACE TYPE | PLAIN |
| AJGD | HEAD TYPE | SLIDING |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | EXTENSION CORD,1 |
| BNRL | SPINDLE TRAVEL DISTANCE | INCHES NOMINAL 2.375 |
| BNRZ | COLUMN TYPE | ROUND |
| AQDD | FEED TYPE | HAND |
| AAXX | MOUNTING TYPE | BENCH |
| ELEC | VOLTAGE IN VOLTS | 110.0 |
| BPSX | HEAD VERTICAL ADJUSTMENT | INCHES MINIMUM 8.000 |
| BQLR | SPINDLE TYPE | THREADED END FOR DRILL CHUCK |
| BTSZ | SPINDLE SPEED QUANTITY | 4 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 750.0 TO 6000.0 |
| BNSF | BASE WORKING SURFACE TYPE | PLAIN |
| ABYE | ELECTRIC MOTOR POWER RATING | HORSEPOWER 0.250 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | CLASS 2 AND STYLE B AND SIZE 1 AND TYPE II |
| BWJT | INTERMEDIATE WORKING SURFACE DIAMETER | INCHES MINIMUM 5.500 |
| BNQL | MAIN DRIVE TYPE | ELECTRIC MOTOR |
| BNSG | BASE WORKING SURFACE SHAPE | ROUND |
| ACDC | CURRENT TYPE | AC |
| BNSH | BASE WORKING SURFACE AREA | SQUARE INCHES 23.748 |
| BNSN | UPPER WORKING SURFACE TYPE | PLAIN |
| BNSP | UPPER WORKING SURFACE SHAPE | RECTANGULAR |
| BNSQ | UPPER WORKING SURFACE AREA | SQUARE INCHES 80.500 |
| BNSC | DRILL CHUCK SIZE ACCOMMODATED | 5/16 IN. KEY |
| BNSD | DISTANCE FROM SPINDLE CENTER TO COLUMN | INCHES NOMINAL 5.875 |
| FAAZ | PHASE | SINGLE |
Supersedes
This item replaces cancelled NIINs 003458866 · 009969371. An older drawing citing one of those numbers resolves here.