NSN 3416-00-252-7094 · NIIN 002527094 · FSC 3416
NO DASHES 3416002527094
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTSZ | SPINDLE SPEED QUANTITY | 16 |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 5.0 |
| BTTD | RATED SWING | INCHES NOMINAL 16.000 |
| ELEC | VOLTAGE IN VOLTS | 220.0 AND 440.0 |
| ADQR | CENTER TO CENTER DISTANCE | INCHES NOMINAL 54.000 |
| AGLD | PERFORMANCE TYPE | STANDARD DUTY |
| AKSL | PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1 EA,BAR,BORING,3/16,1/4,3/8 IN.;4 BELT;12 EA,BIT,BORING,3/16,5/16 IN.;24 EA,BIT BORING,3/8 IN.;10 BLADES,TOOL HOLDER,1/8BY7/8 IN.;1 CENTER LINE,NO.4 ASA TAPER;2 CENTER HEAD,NO.4 ASA TAPER;2 CENTER,TAIL,NO.4 TAPER;1 CHUCK,3 JAW,10 IN.;1 CHUCK,4 JAW,12 IN.;1 EA,DOG,BENT,3/8,1/2,3/4,1,1-1/2 IN.;1 FACEPLATE,LG.,13 IN.;1 FACEPLATE,DOG TAPER NOSE;1 GEAR SET,TRANSING,METRIC,GRAD.;1 EA,HOLDER,LATHE TOOL,BORING HOLDER,CUTOFF OFFSET,LH,RH,STRAIGHT;1 EA,HOLDER,TURNING OFFSET,LH 5/8BY1-3/8,RH,3/8BY5/8 IN.;1 HOLDER,TURNING STRAIGHT 5/8BY1-3/8 IN.;1 PR EA,INDIC.,THD DIAL,LATHE KNURLS,COARSE,MED.,FINE;1 KNURLING TOOL;1 POST TOOL;1 REST,CPD.GRAD.;1 EA,REST,FOLLOWER,STEADY;1 SLEEVE;1 STOP,CARRIAGE,MICROMETER;1 SWITHC;1 ATTACHMENT,TELESCOPIC;1 THD TOOL |
| BTTF | ACTUAL SWING OVER BED | INCHES NOMINAL 16.000 |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 10.000 |
| BTZR | THREAD QUANTITY RANGE | PER INCH 4.0 TO 80.0 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| AAXX | MOUNTING TYPE | FLOOR |
| ACDC | CURRENT TYPE | AC |
| BTTB | SPINDLE SPEED RANGE IN RPM | 28.0 TO 1000.0 |
| BTWB | THREAD CHANGE QUANTITY | 30 |
| BTWL | HEADSTOCK DRIVE TYPE | GEARED HEAD |
| FAAZ | PHASE | THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | SIZE 16 |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | ASHK |
| APGF | DESIGN TYPE | SCREW |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES NOMINAL 1.406 |
| BTYQ | CARRIAGE QUANTITY | 1 |
Supersedes
This item replaces cancelled NIIN 005281925. An older drawing citing one of those numbers resolves here.