NSN 3416-01-449-9188 · NIIN 014499188 · FSC 3416
NO DASHES 3416014499188
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLOOR |
| ACDC | CURRENT TYPE | AC |
| ADQR | CENTER TO CENTER DISTANCE | INCHES NOMINAL 60.000 |
| AGLD | PERFORMANCE TYPE | HEAVY DUTY |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL OR TOOLROOM |
| APGF | DESIGN TYPE | SCREW |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 10.000 |
| BTWB | THREAD CHANGE QUANTITY | 73 |
| BTWC | RATED SWING THROUGH OPEN GAP | INCHES NOMINAL 28.700 |
| BTWD | ACTUAL SWING THROUGH OPEN GAP | INCHES NOMINAL 28.700 |
| BTWF | RATED SWING OVER CLOSED GAP | INCHES NOMINAL 18.100 |
| BTWL | HEADSTOCK DRIVE TYPE | DIRECT PULLEY, BACK GEARED |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES NOMINAL 3.000 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTZR | THREAD QUANTITY RANGE | PER INCH 2.0 TO 84.0 |
| ELEC | VOLTAGE IN VOLTS | 230.0 AND 460.0 |
| FAAZ | PHASE | THREE |
| FEAT | SPECIAL FEATURES | NSN ASSIGNED TO BE GENERIC MASTER FOR 3416-01-237-6063 AND 3416NCC617561 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |