NSN 3417-01-149-8896 · NIIN 011498896 · FSC 3417
NO DASHES 3417011498896
In Stock
MILLING MACHINE,VERTICAL
Milling Machines
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLOOR |
| ABGL | WIDTH | INCHES NOMINAL 10.000 |
| ABRY | LENGTH | INCHES NOMINAL 48.000 |
| ACDC | CURRENT TYPE | AC |
| AJGD | HEAD TYPE | SWIVEL |
| AKYN | FURNISHED ITEMS AND QUANTITY | WORK LAMP 1 |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 3.000 |
| AWZJ | POWER SOURCE | ELECTRIC MOTOR |
| BNBB | TABLE TYPE | PLAIN |
| BNBD | TABLE LONGITUDINAL TRAVEL | INCHES NOMINAL 32.000 |
| BNBF | TABLE CROSS TRAVEL | INCHES NOMINAL 12.000 |
| BQLR | SPINDLE TYPE | VERTICAL SWIVEL GRADUATED |
| BTZC | TABLE VERTICAL TRAVEL | INCHES NOMINAL 16.500 |
| BTZK | MAXIMUM DISTANCE FROM SPINDLE NOSE TO WORKING SURFACE | INCHES 16.500 |
| ELEC | VOLTAGE IN VOLTS | 220.0 AND 440.0 |
| FAAZ | PHASE | THREE |
| FEAT | SPECIAL FEATURES | THREE 0.625 IN. TABLE T-SLOTS; DISTANCE BETWEEN TABLE T-SLOTS 2.250 IN.; TABLE HANDWHEEL DIAL GRADUATIONS 0.001 IN.; QUILL TRAVEL 5.250 IN.; OVERARM TRAVEL 30.0 IN.; CENTER OF SPINDLE TO COLUMN FACE 2.500 IN. MINIMUM, 28.0 IN. MAXIMUM; CENTER OF TABLE TO COLUMN FACE 5.0 IN. MINIMUM, 17.0 IN. MAXIMUM; HEAD TILT FRONT TO BACK 45 DEGREES, HEAD TILT BACK TO FRONT 45 DEGREES; HEAD TILT SIDE TO SIDE, LEFT AND RIGHT 90 DEGREES; STANDARD R-8 SPINDLE TAPER OR NO. 9 BROWN AND SHARPE TAPER; OPTIONAL NO. 30 MMT QUICK-CHANGE OR NO. 200 KWIK-SWITCH IS AVAILABLE WHEN SPECIFIED; SPINDLE SPEEDS VARIABLE, BACK GEAR 50 RPM TO 525 RPM, DIRECT DRIVE 400 RPM TO 4200 RPM; REVERSIBLE SPINDLE ROTATION; QUILL FEEDS 0.0015 IN., 0.003 IN., 0.006 IN.; QUILL DIAMETER 3.375 IN.; TURRET AND OVERARM ROTATION 360 DEGREES; SHIPPING WEIGHT APPROXIMATELY 3020 POUNDS |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| NMBR | QUANTITY | 1 |