NSN 5910-00-229-8814 · NIIN 002298814 · FSC 5910
NO DASHES 5910002298814
In Stock
CAPACITOR,FIXED,GLASS DIELECTRIC
Capacitors
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-23269 TO 4 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHM-MICROFARADS 100000.0 |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.1000 |
| CWQF | QUALITY FACTOR AT REFERENCE TEMP | 1000.0000 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1.0000 |
| CQBQ | CAPACITANCE VALUE PER SECTION | MICROFARADS SINGLE SECTION 6.200 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 125.0 |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION 140.0 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 500.0 |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -25.0 TO 25.0 |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.025 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-23269 |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| CQBF | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | MEGOHM-MICROFARADS 10000.0 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -1.00 TO 1.00 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.125 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.766 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.141 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.750 |
| MATT | MATERIAL | CASE GLASS |
Supersedes
This item replaces cancelled NIINs 008090039 · 008927423. An older drawing citing one of those numbers resolves here.