NSN 3413-00-222-2141 · NIIN 002222141 · FSC 3413
NO DASHES 3413002222141
In Stock
DRILLING MACHINE,UPRIGHT
Drilling and Tapping Machines
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BQLR | SPINDLE TYPE | THREADED END FOR DRILL CHUCK |
| BPSX | HEAD VERTICAL ADJUSTMENT | INCHES NOMINAL 8.250 |
| BNSY | SWIVEL ADJUSTMENT IN DEG | 360.0 |
| BNST | UPPER WORKING SURFACE WIDTH | INCHES NOMINAL 12.000 |
| BNSX | UPPER WORKING SURFACE VERTICAL ADJUSTMENT | INCHES NOMINAL 8.250 |
| BNSS | UPPER WORKING SURFACE LENGTH | INCHES NOMINAL 12.000 |
| AAXX | MOUNTING TYPE | FLOOR |
| ABYE | ELECTRIC MOTOR POWER RATING | HORSEPOWER 0.500 |
| ACDC | CURRENT TYPE | AC |
| AJGD | HEAD TYPE | SLIDING |
| AQDD | FEED TYPE | HAND |
| BCRH | SPINDLE QUANTITY | 1 |
| BNQL | MAIN DRIVE TYPE | ELECTRIC MOTOR |
| BNRL | SPINDLE TRAVEL DISTANCE | INCHES NOMINAL 6.000 |
| BNRW | BASE WORKING SURFACE LENGTH | INCHES NOMINAL 11.000 |
| BNRX | BASE WORKING SURFACE WIDTH | INCHES NOMINAL 9.000 |
| BNRZ | COLUMN TYPE | ROUND |
| BNSC | DRILL CHUCK SIZE ACCOMMODATED | 1/2 IN. KEY |
| BNSD | DISTANCE FROM SPINDLE CENTER TO COLUMN | INCHES NOMINAL 7.000 |
| BNSF | BASE WORKING SURFACE TYPE | SLOTTED |
| BNSG | BASE WORKING SURFACE SHAPE | RECTANGULAR |
| BNSN | UPPER WORKING SURFACE TYPE | SLOTTED |
| BNSP | UPPER WORKING SURFACE SHAPE | SQUARE |
| BTSZ | SPINDLE SPEED QUANTITY | 5 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 400.0 TO 3000.0 |
| ELEC | VOLTAGE IN VOLTS | 110.0 |
| FAAZ | PHASE | SINGLE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | CLASS 1 |