NSN 3416-00-517-1051 · NIIN 005171051 · FSC 3416
NO DASHES 3416005171051
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTWB | THREAD CHANGE QUANTITY | 48 |
| BTWL | HEADSTOCK DRIVE TYPE | GEARED HEAD |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES NOMINAL 1.406 |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 48 |
| BTZR | THREAD QUANTITY RANGE | PER INCH 4.0 TO 80.0 |
| ELEC | VOLTAGE IN VOLTS | 220.0 AND 440.0 |
| FAAZ | PHASE | THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 9.000 |
| BTSZ | SPINDLE SPEED QUANTITY | 16 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 28.0 TO 1000.0 |
| BTTD | RATED SWING | INCHES NOMINAL 14.000 |
| BTTF | ACTUAL SWING OVER BED | INCHES NOMINAL 14.000 |
| AAXX | MOUNTING TYPE | FLOOR |
| ACDC | CURRENT TYPE | AC |
| ADQR | CENTER TO CENTER DISTANCE | INCHES NOMINAL 30.000 |
| AGLD | PERFORMANCE TYPE | STANDARD DUTY |
| AKSL | PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1 BELT SET,COMPLETE; 1 CENTER,HALF; 1 CENTER,HEADSTOCK; 1 CENTER,TAILSTOCK; CHUCK,DRILL,1/2 IN. CAPACITY; 1 CHUCK,SPINDLE NOSE,LATHE; 1 CHUCK,3 JAW,UNIVERSAL,6 IN.; 1 CHUCK,4 JAW,INDEPENDENT 8 IN.; 1 COLLECT SET,1/16 IN. TO 1-3/8 IN. RANGE,11 COLLECTS; 1 COOLANT SYSTEM,MOTOR DRIVEN; 1 DOG SET,BENT,1 IN.,2 IN.,3 IN.,4 IN. SIZES; 1 HOLDER,TOOL,KNURLING ARMSTRONG NO. 1K; 1 HOLDER,TOOL,BORING ARMSTRONG NO. 9; 1 HOLDER,TOOL,CUT-OFF ARMSTRONG NO. 31-L; 1 HOLDER,TOOL,CUT-OFF ARMSTRONG NO. 31-R; 1 HOLDER,TOOL,TURNING ARMSTRONG NO. 1R; 1HOLDER,TOOL,TURNING ARMSTRONG NO. 1-L; 1 MANDREL SET,LATHE; 1 MOTOR,5 HP,220/440V,60 CYCLES,3 PHASE,1800 RPM; 1 REST,FOLLOW; 1 STARTER,NON-REVERSING,MAGNETIC; 1 SWITCH,PUSH,REMOE CONTROL; 1 TAPER ATTACHMENT,TELESCOPIC |
| APGF | DESIGN TYPE | SCREW |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 5.0 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 2 AND SIZE 14 |