NSN 3130-01-017-6625 · NIIN 010176625 · FSC 3130
NO DASHES 3130010176625
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABJH | TEMP RATING | CELSIUS 121.0 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 1.1880 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.4380 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 0.7500 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 5.6880 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 4.1880 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 1.9380 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 4.1880 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | INCHES NOMINAL 8.0000 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | RIGID |
| AGZH | INTERNAL FIT-UP DESIGNATION | LOOSE |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 3.1496 |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 2.1250 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 90.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | OVERALL STEEL |
| STYL | STYLE DESIGNATOR |