NSN 3120-00-839-0743 · NIIN 008390743 · FSC 3120
NO DASHES 3120008390743
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 2.2300 AND INCHES MAXIMUM 2.2700 |
| MATT | MATERIAL | RACE LINER PLASTIC TETRAFLUOROETHYLENE |
| MATT | MATERIAL | ROD END BODY STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER MEMBER FED STD SINGLE MATERIAL RESPONSE FED-STD-66 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 77272-5435 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 2.8400 AND INCHES MAXIMUM 2.9000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.312 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.2500 AND INCHES MAXIMUM 0.2700 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.3380 AND INCHES MAXIMUM 0.3430 |
| MATT | MATERIAL | RACE INSERT STEEL |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 3.3200 AND INCHES MAXIMUM 3.4200 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE LINER MFR REF SINGLE MATERIAL RESPONSE 114S1730-2,77272 |
| FEAT | SPECIAL FEATURES | 10 DEG SELF-ALIGNMENT IN EITHER DIRECTION |
| MATT | MATERIAL | INNER MEMBER STEEL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.2495 AND INCHES MAXIMUM 0.2500 |
| STYL | STYLE DESIGNATOR | |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 0.9800 AND INCHES MAXIMUM 1.0000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE INSERT FED STD SINGLE MATERIAL RESPONSE FED-STD-66 |