NSN 5310-01-467-2336 · NIIN 014672336 · FSC 5310
NO DASHES 5310014672336
In Stock
WASHER,FLAT
Nuts and Washers
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.439 AND INCHES MAXIMUM 0.807 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 0.807 AND INCHES MAXIMUM 0.817 |
| ABNM | THICKNESS | INCHES MINIMUM 0.071 AND INCHES MAXIMUM 0.085 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 45.0 |
| CSYM | SURFACE FINISH | ALL SURFACES MICROINCHES 125.0 |
| FEAT | SPECIAL FEATURES | RECESS DIAMETER: 0.539 IN. MIN. AND 0.549 IN. MAX.;RECESS ANGLE: 90.0 DEG. NOM.;STYLE DESIGNATOR: RECESSED |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5596 AND ASSN STD SINGLE MATERIAL RESPONSE A-S 5597 AND ASSN STD SINGLE MATERIAL RESPONSE A-S5662 |
| SPCL | SPECIAL TEST FEATURES | "P" AFTER DASH NUMBER IS DESIGNATED FOR FINISH CODE AS CADMIUM PLATE |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906--S14183 REV. B |