NSN 5305-01-734-0377 · NIIN 017340377 · FSC 5305
NO DASHES 5305017340377
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.375 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, CAP, SOCKET HEAD-HEXAGON, CORROSION RESISTANT |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) SINGLE MATERIAL RESPONSE AST-F593 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.244 AND INCHES MAXIMUM 0.250 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.2500 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.1875 AND INCHES MAXIMUM 0.1900 |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZW |
| CSYT | CHAMFER ANGLE | DEGREES MINIMUM 30.0 AND DEGREES MAXIMUM 45.0 |
| AASK | HEAD STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 1.00 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.244 AND INCHES MAXIMUM 1.250 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | MATERIAL CONTROLLED IAW SS800-AG-MAN-010/P-9290 SYSTEM CERTIFICATION PRODURES AND CRITERIA MANUAL FOR DEEP SUBMERGENCE SYSTEMS; CRITICAL ITEM FOR SAFETY AND SURVIVAL OF DEEP SUBMERGENCE RESEARCH AND RESCUE VEHICLES AS DIFFERENTIATED BY SPECIAL TEST FEATURES |
| CMLP | THREAD QUANTITY PER INCH | 20.0 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 2540.0 |