NSN 5990-00-644-0090 · NIIN 006440090 · FSC 5990
NO DASHES 5990006440090
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJWY | SECOND SHOULDER FACE TO REAR FLANGE DISTANCE | INCHES NOMINAL 0.0450 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1820 |
| CWJD | SHAFT UNDERCUT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0100 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-22335 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.774 |
| CSLT | SHAFT TAPER ANGLE IN DEG | 0.021 |
| CTBP | SHAFT TIP LENGTH | SINGLE SHAFT INCHES NOMINAL 0.1500 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 4.2000 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.2480 AND INCHES MAXIMUM 2.2500 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.0250 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 2.2300 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0550 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3850 |
| AEDC | SHAFT UNDERCUT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0150 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 50.0 |
| AJSL | BODY SIZE | 23 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -18.0 TO 18.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MINIMUM 0.035 |
| CQRG | BODY MATERIAL | ALUMINUM |
| CQTM | TERMINAL LOCATION | REAR |
| AAQL | BODY STYLE | |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 300.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 8.0 |
| AKAN | SHAFT THREAD CLASS | 2A |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, TAPERED, THREADED, UNDERCUT |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1560 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.1250 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.112 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 1.0625 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES NOMINAL 1.9500 |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.2500 |
| CWAC | SHAFT TAPER LENGTH | SINGLE SHAFT INCHES NOMINAL 0.1840 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8440 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
Supersedes
This item replaces cancelled NIINs 000401659 · 006885070 · 011888719. An older drawing citing one of those numbers resolves here.